Skip to the page

Blog / Filming

How to improve audio on phone video, in the order that actually works

Here is the uncomfortable thing about phone video. When a client sends me a clip that is a little dark, a little soft or slightly crooked, I can usually save it. When the voice is thin, boomy and buried under a fridge hum, I mostly cannot. Picture is forgiving in the edit. Sound is not.

And it matters more than people expect. A 2018 paper in Science Communication played people the same conference talks and radio interviews, some in good sound and some in poor sound. Listeners judged both the speaker and their work more harshly when they heard the worse recording. The words were the same; only the sound had changed. The study was about scientists, not shops, but I would expect a business owner explaining their product to get the same treatment.

Most of the guides I found when I searched this open with a list of microphones. I would rather start with the four fixes that cost nothing, in the order they help, and get to buying things at the end. This is the order I give clients who film for me.

Why the edit cannot save most bad sound

Three problems arrive in footage I am asked to fix, and they are not equally fixable.

  • Background noise (air conditioning, traffic, a fan) can be reduced in the edit. Push the reduction hard and the voice starts to sound watery and processed, so it is a rescue, not a repair.
  • Echo (the voice bouncing off bare walls, hard floors and glass) is baked into every word. It can be softened. It cannot be removed cleanly.
  • Distortion and clipping (someone shouting into the phone, or a wind gust hitting the microphone) destroy the waveform itself. Light clipping can sometimes be patched; hard clipping cannot be recovered, because there is nothing underneath.

So the job on the day is to record a voice that needs as little rescue as possible. Every step below is about that.

Fix one: get closer, because distance beats everything

The single biggest change you can make is free. Move the microphone closer to the mouth.

A phone propped on a shelf two metres away records the person, and the room, and the room wins. The further the microphone is from the speaker, the quieter the voice becomes compared with everything else it hears: the echo off the walls, the hum, the street. Halve the distance and the voice gets much louder against all of that, without anything else changing.

In practice, for a talking-to-camera reel filmed on the phone itself, that means framing tighter rather than standing back. Chest-up at arm's length or a little more sounds far better than full-body across a room. If you need the wide shot, that is the moment for a separate microphone, which I come to below.

The other half of distance is direction. The phone's microphones sit in its body, and on every phone I have filmed with, one is near the bottom edge. Keep fingers, cases and mounts clear of the openings. A phone case or a clamp that covers a microphone hole will make a voice sound muffled in a way no edit can undo.

Fix two: choose the room, then switch things off

Echo comes from hard, empty surfaces. The rooms that sound best are the ones with soft things in them: a bedroom with a bed and curtains, an office with a rug, bookshelves and a sofa, a shop floor with stock on the shelves. The rooms that sound worst are the ones people choose because they look clean: an empty white room, a tiled kitchen, a glass meeting room, a bare warehouse.

If you have to film in a hard room, add soft things just out of shot. A rug on the floor, a blanket over the table in front of the speaker, coats on a rail behind the camera. You are not trying to soundproof anything, only to give the voice fewer flat surfaces to bounce off.

Then listen to the room before you press record. Close your eyes for ten seconds and you will hear what the phone hears: the air conditioning, the fridge, the drinks chiller, the extractor fan, the radio in the back. Switch off whatever you can for the take. Write yourself a note to switch the fridge back on.

One habit I ask every client for: before or after the takes, record ten seconds of the empty room with nobody talking. Editors call it room tone. It gives me a clean sample of the background, which makes noise reduction far gentler, and it fills any gap I cut so the background does not drop out between sentences.

Fix three: leave the phone's sound settings alone, and send the original

The details below are for iPhone, because that is what most of my clients film on. On any other phone the principle is the same: keep the default recording setting, leave the built-in noise and wind options on, and send the untouched file.

On the phone itself there is less to change than you might think, and the main risk is changing the wrong thing.

Apple's guide says that iPhone 16 and later record video sound in Spatial Audio, with Stereo and Mono as alternatives under Settings, Camera, Record Sound. Earlier models record in stereo; Apple notes that iPhone uses multiple microphones to achieve stereo sound. The same sound page says that on iPhone 16 or later, recording in Spatial Audio or Stereo reduces wind noise automatically, with a Wind Noise Reduction switch to turn it off.

The setting that matters most is the one you probably will not touch. Apple's Photos guide explains that when you record with Spatial Audio, you can use Audio Mix in the Photos app to edit the sound, with options that reduce sounds from sources not visible in the frame, reduce background sound and reverb, or move voices onto a front-facing track. That is useful, and it only exists if you recorded in Spatial Audio. Switch to Mono to "keep it simple" and you give up that option before anyone has heard the clip.

My rule for clients:

  • Leave Record Sound on the default for your phone and Wind Noise Reduction on.
  • Do not run Audio Mix yourself on clips you are sending to an editor. Send the untouched original and say which clips were noisy; I would rather choose how far to push it while hearing the whole edit.
  • Send the original file through a shared folder or a cable, never a chat app, for the reasons in the camera settings post.

Fix four: add a microphone, the right kind for the shot

Only now, with the distance, the room and the settings sorted, does a microphone earn its money. The point of a microphone is not that it is better than the phone's. It is that it can be close to the mouth when the phone cannot.

There are three sensible routes for a small business, and they suit different shots.

  • A wired clip-on (lavalier). Clipped to the shirt a hand's width below the chin, it is close to the mouth wherever the camera is. On iPhone 15 and later, Apple lists microphones among the USB-C devices the connector can work with, so a USB-C clip-on plugs straight in. The cable limits how far the speaker can walk.
  • A wireless clip-on kit. A transmitter on the speaker, a receiver on the phone. This is what I suggest for anyone filming walk-and-talks, product demos at a bench or anything wider than chest-up. Watch the level meter on the receiver, and run the headphone test below, before you trust it with a real take.
  • AirPods or similar earbuds. Apple's sound page notes that with supported AirPods models you can use your AirPods as a microphone when you record video. In my experience they beat a phone across the room, but they are visible in shot, which suits some brands and not others.

Whichever you use, wear it where the person will not touch it or brush it with a collar, and keep a jacket from rubbing over it. Clothing rustle is one of the problems I cannot clean.

If you record sound on a separate device rather than into the phone, clap once, on camera, at the start of each take. The sharp spike on the waveform lets the editor line the two files up exactly.

Where I fit: the shot list I send says which shots need a clip-on and which can use the phone, so sound is planned before anyone presses record. Then I clean it, mix it under music and cut it. If that would help, Book a call.

The thirty-second test before every shoot

Before the real takes, record a test of a few sentences at the volume the person will actually speak. Then play it back on headphones, not the phone speaker, which flatters everything.

Listen for four things:

  1. Is the voice clearly louder than everything else?
  2. Can you hear the room, a ringing or hollow quality, behind the words?
  3. Is there a hum, a buzz or a rustle you did not notice while talking?
  4. When the person laughs or raises their voice, does it crackle?

If any answer is wrong, fix it now: move closer, add something soft, switch something off, reposition the microphone. Thirty seconds of listening saves a reshoot, and a reshoot is the only real fix for sound that went badly wrong.

For the rest of the shoot, from framing to takes, the checklist is in how to film a reel on your phone. If you would rather someone else made the calls, that is what I do when I make video for a client.

get the sound right and the edit gets easier

I direct, script, edit and design for brands that show up on camera: reels, long-form and clips, static images, and brand guidelines if you need them. Thirty minutes on a call is enough for me to say what I would make for you.

Book a call